 |
Performance
Topcoats
Abrasion Resistant · Chemical
Resistant · Stain Resistant · Reflective or Low
Glare
 Dur-A-Flex®
Performance Topcoats offer you a complete selection of finishing
solutions and give you an extra measure of control over the
appearance and function of your flooring systems. Together with
the inherent chemical and abrasion resistant qualities of Dur-A-Flex®
coatings and matrix layers, Performance Topcoats deliver superior
corrosion resistance and increase your floor's longevity. Available
in high-gloss, satin or flat urethane formulations or an attractive
low-glare satin finish acrylic coating, you can brighten or
soften the lighting in your facility. Whatever your flooring
application, Dur-A-Flex® topcoats make your floors better
looking and easier to maintain.
Ultra-ClearTM
Ultra-Clear is a clear, two component, 100% solids epoxy designed
specifically for the Dur-A-Quartz and Dur-A-Chip decorative floor
systems. Ultra-Clear protects against UV rays, reinforces the
visual depth and texture of the quartz and chip blends..
Cryl-A-Top T-301TM
Cryl-A-Top T-301 is a 100% solids, fast curing, high strength,
methyl methacrylate (MMA) based, acrylic reactive resin. It is
formulated to form a monolithic bond with other Cryl-A-Flex systems
and to be UV resistant.
Cryl-A-Top T-302TM
Cryl-A-Top T-302 is a 100% solids, fast curing, flexible, methyl
methacrylate (MMA) based, acrylic reactive resin. It is formulated
to form a monolithic bond with other Cryl-A-Flex systems and to
be UV resistant.
Cryl-A-Top T-303TM
Cryl-A-Top T-303 is a 100% solids, fast curing, high strength,
methyl methacrylate (MMA) based, acrylic reactive resin. It is
formulated to form a monolithic bond with other Cryl-A-Flex systems
and to be UV resistant.
Poly-Crete KTTM
Poly-Crete KT is a 100% solids aromatic urethane used to topcoat
Poly-Crete MDB floors.
Poly-Crete TFTM
Poly-Crete TF is a solvent free, high build coating based upon
polyurethane technology. It is designed as a topcoat for Poly-Crete
WR and Poly-Crete HF.
Poly-Thane #1TM
Poly-Thane #1 is a clear, two component aromatic polyester urethane
performance topcoat. It is designed to provide the best possible
protection against very aggressive solvents, acids, water, alcohol,
salt solutions etc.
Poly-Thane #2 High SolidsTM
Poly-Thane #2 High Solids is a two component, clear polyester
high solids protective coating. It is designed to provide the
best possible wearability without the VOC concerns encountered
with traditional urethane systems.
Dur-A-Glaze #5TM
Dur-A-Glaze #5 is a clear, two component aliphatic polyaspartic
ester high performance polymeric system. It is designed to be
resistant to many solvents, acids and chemicals while being
resistant to ultra violet rays from sunlight or high intensity
lights
Armor TopTM
Armor Top is a three component, aliphatic urethane, protective
coating.It is formulated for high traffic areas to protect against
chemicals and wear. It is designed as a final topcoat over Dur-A-Glaze
#4 or Dur-A-Gard systems.
Enviro-TopTM
Enviro-Top is a two component, clear waterborne aliphatic urethane
protective coating. Enviro-Top is available in a gloss or satin
finish and is designed to provide durability without high VOC
or odor concerns encountered with solvent based urethanes.
|
 |
